Pilot
Assemblies
Cici Boiler
Rooms stocks the most common Gordon-Piatt
pilot assemblies for Gordon-Piatt burners.
The pilot
assembly is a vital part of your burner and
must be kept clean and properly adjusted at
all times.
Below are just some of the many pilot
assemblies used by Gordon-Piatt:
|
216C Gas Pilot Assemblies |
|
Gordon-Piatt
GP216C-4-6-8
Pilot w/ Electrode & .213
Orifice
For 4", 5.5" or 8" Burner Noses
Takes
this electrode
919000-0700
Longer Pilots are available!
Use 919000-0702 on
combustion heads with a 12" nose
Takes
this electrode
Use 919000-1000 on
combustion heads with a 17" nose
Takes
this electrode |
 |
|
|
214B/D Gas Pilots (Old Style) |
|
Gordon-Piatt
Old-Style Pilot Assembly
GP214D w/ scanner tube
190173-0102
|
 |
|
|
Gordon-Piatt
Old-Style Pilot Assembly
GP214B w/ flame rod
190058-0003
|
 |
|
|
|
Gordon-Piatt
S4
Pilot Assy w/ Electrode
260071-1000
|
 |
|
|
|
|
Gordon-Piatt
Ignition Electrode
Most common GP electrode
921000-3500
TIP: Always install
copper gasket
w/ flat side to insulator
NOTE: Longer
electrodes are available for
extended nose combustion heads.
Verify part number or length prior
to ordering.
|
 |
|
|
|
Orifice Size: 0.067 (Nat)
230012-0067
Orifice Size:0.040 (LP)
230012-0040
Orifice Size:0.154 (Nat &
LP)
230012-0154
Orifice Size:0.125 (LP)
230012-0125 |
 |
Up to top
Burner
technology of Gordon-Piatt Energy Group,
Inc. was purchased by John Zink Company,
LLC, in October 2000. In 2009, a
decision was made that the John Zink
Company, LLC. will discontinue production of
all Gordon-Piatt burners. Cici Boiler
Rooms, Inc. is not a factory-authorized
distributor of John Zink Gordon-Piatt brand
products.
|
